Mason Neck, VA
Residential Heating Services
Our team’s priority is to be there when you need us, keep your home at the perfect temperature and your energy bills low.
Call (703) 644-6400
We’re committed to the highest quality standards, and we’ll be there when you need us for your Mason Neck home, 24/ 7 for your heating needs.
We’re dedicated to the best possible customer care possible for you. Our technicians are knowledgeable and experienced, providing the same quality of customer care across the board, giving you the best heating service in Mason Neck.
Our NATE-certified technicians will provide the best heating services for your home, including new system installation, repair, or maintain your existing system. We can help you choose the right Energy Star heating system to help save on your energy bills without sacrificing comfort. Our prices are always up-front and we guarantee quality assurance.
- Heating System Repair
- Heating System Installation & Replacement
- Heating System Maintenance
- Heating Products
Heating System Repair
We’re on-call 24/7 for any Heating emergency – we’ll be there to help, no matter when you need us. Trademasters cares about the comfort and safety of our customers, which is why we offer professional heating repair services that will get your heating system back up and running effectively and efficiently.
New Heating System Replacement
We offer a wide selection of heating equipment, and we promise that it will be professionally installed for you by our highly trained, NATE-certified technicians. Whether you need a new furnace, boiler, heat pump, or ductless system, we will help you select the perfect type of equipment for your home, to optimize your home comfort and help you save on your energy bills.
Air Conditioning System Maintenance Services
At Trademasters, we offer preventive heating system maintenance plans for all types of heating systems. One of the best ways you can ensure that the heating in your home is operating at most effectively and efficiently is by choosing heating maintenance service. We’ll thoroughly check and clean your system, helping it operate reliably, safely, and efficiently when you need it most.
Today’s furnaces use modulating flames and condensing technology to provide the best efficiency possible. Modulating flames can adjust at micro-increments for optimal efficiency, helping you stay toasty while saving on your energy bills. And, condensing technology uses heat energy that was lost in the past.
And, variable speed fan motors allow our furnace products to provide you with much quieter comfort. A variable speed ECM fan motor not only raises the comfort level in your home, but is also whisper-quiet.
If you have radiant heat in your home, you likely depend on a boiler system to keep your home warm. We’re pleased to offer our customers quality boiler products that are made to provide you with reliable, durable heating, year after year. Boilers are designed to spread consistent warmth through your home’s radiant system. Boilers provide reliable, quiet heating while offering ultimate energy efficiency – in some cases, up to 90 percent.
Air handlers are electric furnaces with integrated cooling/heating coils. They are normally installed in conjunction with a heat pump. Air handlers distribute air equally throughout your house, provide heat in the winter, while dehumidifying and cooling your home in the summer. They are quite often installed in homes with no natural gas or as auxiliary systems in a basement or room addition.
In the winter, a heat pump reverses the cooling process most homeowners experience from their AC systems. The heat pump absorbs heat energy from the air outside, and uses this to heat indoor air by dissipating the heat energy inside.
Geothermal heat pumps, also known as ground-source heat pumps, can heat, cool, and even supply hot water to a home by transferring heat to or from the ground and can cut energy bills by up to 65% compared to traditional HVAC units.
If you need to efficiently, quietly heat (or cool) a room or living space without ductwork, then ductless systems, also called mini-splits, are the right choice. They follow the model of typical air conditioning or heat pump systems. An air conditioner or heat pump is located outside, and an indoor air handler is located inside. The difference is, the ductless air handler is small, and mounted on a wall or recessed in the ceiling. A ductless air handler is designed to condition the air in a specific living space. There are ductless products on the market that can provide comfort for multiple rooms – this allows for room by room comfort that simply wasn’t possible in the past without ductwork.
What our customers say:
“We know that when we build the team the right way, our customers really notice the difference. We’re dedicated to our co-workers, because together, we will create something great.”
– Dave Kyle | President/CEO
As the heating company Mason Neck trusts, we’re passionate about delivering exceptional service with every customer visit.
We look forward to earning your confidence and trust every day.
- We’re committed to excellence and always have our customers best interests at heart.
- We’re proud to attract and retain the area’s most skilled and highly-qualified technicians.
- You can always rely on Trademasters to be punctual and professional.
- We take safety, security, and cleanliness seriously. We treat our customers like part of the family.
- Heating and Air Conditioning
- Air Conditioning
- Air Handlers
- Energy Efficient Retrofitting & Energy Audits
Heating and Air Conditioning
- Heat pumps
- Air conditioning units
- AC compressors
- Geothermal heating
- Central heating
Heat pumps are air conditioners that run in reverse. They extract heat from outside and pump it inside. Heat pumps can be installed with an electric furnace on the inside or combined with a gas furnace. Either of these options create a dual fuel hybrid heating and cooling system.
In more moderate temperatures, a dual fuel hybrid system uses the electric heat pump to heat your home. When temperatures drop below freezing, it automatically switches over to gas. Since electric companies tend to charge less for electricity during the winter months, using an electric furnace can save you money.
A heat pump makes an ideal heating/cooling system for a basement remodel or a room addition. It is more efficient, has a lower upfront cost, and is less complicated to install compared to a traditional gas-fuel system.
Types of Air Conditioners
Air conditioners can be organized several ways, but the easiest is by type. All units can be divided into three distinct major types: single stage, two stage, and variable speed units.
Efficiency or SEER Rating
“SEER” is an abbreviation for “seasonal energy efficiency ratio.” The SEER (or efficiency) rating of an air conditioner refers to how much electricity the unit will use to keep you cool during a typical season. Higher numbers are better: the higher the SEER, the higher the efficiency is, and the less electricity the unit will consume.
Tonnage or Capacity
The “tonnage” of an air conditioner refers to the unit’s ability to remove heat from your home. The heat contained in buildings is measured in tons.
To give you an idea of what a ton of heat is, imagine a block of ice weighing one ton. One ton of heat is the amount of heat it would take to melt that block of ice in an hour. A ton of heat is also equivalent to 12,000 BTUs or 18,000 burning matches.
Residential air conditioners are made in sizes of 1.5 to 5 tons. They usually increase size in half-ton increments. The job of an air conditioning contractor is to determine what size (or tonnage) unit you need for your house. In this case, it is not a matter of “the more, the better.”
An oversized air conditioner will not remove the proper amount of moisture from the air. An undersized air conditioner will run constantly even at moderate temperatures and will not adequately condition the space. Since every home is unique, the best option is often to choose a two speed or variable unit. They work well even when slightly oversize.
Adding a variable speed furnace will help you remain dry as well as cool.
Single Speed Air Conditioners
Single speed air conditioners produce the same amount of heat removal all the time regardless of how hot and muggy it is outside. They are built to handle the hottest days of the year. While this is great in July, it means that they are larger than needed the rest of the time.
A good contractor will select a unit slightly smaller than what is needed for peak temperatures, since most of the time we do not see peak temperatures. Matching your unit to the temperatures you see most of the time will be more efficient and save you money.
Two Speed Air Conditioners
Two speed air conditioners have two distinct output capacities to better condition your home. These units can change the amount of cooling capacity they produce depending on how hot it is. Because they can slow down and run longer, they do a better job of removing moisture and providing enhanced comfort.
Variable Speed Air Conditioners
We recommend Variable Speed units for large homes. Instead of turning on and off all day to adjust the temperature, they run at a variable speed. They have 700 different outputs, which means they can accurately provide temperatures to within 1/10th of the degree you want. They provide exceptional comfort and moisture removal, with none of the hot and cold temperature swings typical to one and two speed units.
Air handlers are electric furnaces with integrated cooling/heating coils. They are normally installed in conjunction with a heat pump. Air handlers distribute air equally throughout your house, provide heat in the winter, and dehumidify and cool your home in the summer. They are quite often installed in homes with no natural gas or as auxiliary systems in a basement or room addition.
Just as there are several types of gas furnaces, there are several types of air handlers.
- Different speeds: A single speed air handler runs at the same fan speed all the time. Variable speed air handlers that vary their output by demand.
- Different currents: A variable speed air handler runs off D/C (direct current), while a single stage air handler is powered by A/C (alternating current). The D/C driven variable speed air handler can be coupled with a humidity-sensing thermostat that allows enhanced dehumidification in the summer.
A variable speed air handler can remove 5-10% more moisture from your home than a standard single speed unit can.
Air handlers typically have auxiliary heating elements, which are installed by your contractor. These heating elements are available with different amounts of heat output. Heating elements provide heat on chilly days to supplement the output of heat pumps or a furnace.
Energy Efficient Retrofitting & Energy Audits
Heating and cooling equipment over ten years old can be significantly less efficient than currently available systems. Upgrading an older system can not only help the environment, but also save money through reduced energy use, decreased down-time, and lower maintenance and repair expenses. Retrofitting an older, inefficient HVAC system can more than pay for itself in a very short time.
Trademasters uses the latest state-of-the-art equipment and methods, applying a comprehensive approach to retrofitting that ensures your HVAC system’s efficiency, reliability, and safety. Energy Star rated heating and cooling equipment can help you save up to 30% on energy costs and meet new environmental standards.
It’s a win-win for both the environment and your budget.
Areas We Offer Residential Heating and Air Conditioning Services
Prince William County
- Dale City, VA 22193
- Triangle, VA 22172
- Dumfries, VA 22026
- Woodbridge, VA 22191–22195
- Ashburn, VA 20107; 20147-20148
- Dulles, VA 20166
- South Riding, VA 20152
- Sterling, VA 20164-20165
Trust us to be there when you need help. Call the Trademasters team today.
Or complete the form below.
We're trusted across Northern Virginia when it comes to residential and commercial HVAC services.
We proudly serve your neighbors in Northern Virginia, including Fairfax County, Prince Williams County, Arlington County, and Loudoun County. Many of our residential customers live in these areas: